Principal

Papers Published in International Journals : 19

Publications (List of papers published in SCI Journals, in year wise descending order).

• Gopinath D, Ganapathy Sundaram E, Thennarasu P, Arivazhagan S (2023), “Reducing gasoline engine emissions using novel bio-based oxygenates: A review”, Emergent Materials, 1-21.
• Thennarasu P, Ganapathy Sundaram E, Gopinath D, Arivazhagan S (2023), “Performance optimization of gasoline engine fueled with ethanol/n-butanol/gasoline blends using response surface methodology”, Biofuels, 1-23.
• Gavaskar, T., Ramanan M, V., Arun, K., Arivazhagan, S. (2023), “ The combined effect of green synthesized nitrogen-doped carbon quantum dots blended jackfruit seed biodiesel and acetylene gas tested on the dual fuel engine”, Energy, Vol. 275, pp. 127296
• V Ashok Kumar, K Muninathan, S Arivazhagan, N Monish, M Venkata Ramanan, Vaddi Seshagiri Rao, Gurunathan Baskar (2023), “Investigations on carbonization operating conditions of ANSYS customized kiln for charcoal production from Prosopis juliflora biomass and ANN model prediction for optimized operating conditions” Fuel, Vol.350, pp 128838
• Ashok Kumar, S Arivazhagan, K Muninathan (2022), “Experimental and computational study of melting phase-change material for energy storage in shell and tube heat exchanger” Journal of Energy Storage, Vol.50, pp. 104614
• P Thamizhvalavan, N Yuvaraj, S Arivazhagan (2022), “ Abrasive Water Jet Machining of Al6063/B4C/ZrSiO4 Hybrid Composites: a Study of Machinability and Surface Characterization Analysis” Silicon, Vol. 14, No. 3, pp. 1093-1121
• Chandramohan, P, Murugesan, S. N. & Arivazhagan, S. (2021), “Experimental Investigation of Multi-Jet Air Impingement in Various Conditions and Analysis using Desirability Based Response Surface Methodology” Journal of Applied Fluid Mechanics, Journal of Applied Fluid Mechanics , 14(1), pp. 131–145 (Impact Factor: 1.09)
• Leo, G.M.L., Sekar, S., Arivazhagan, S. (2020), “Experimental investigation and ANN modelling of the effects of diesel/gasoline premixing in a waste cooking oil-fuelled HCCI-DI engine” Journal of Thermal Analysis and Calorimetry, doi:10.1007/s10973-020-09418-z
• G. M. Lionus Leo, S. Sekar, S. Arivazhagan (2019) , “experimental investigation, ann modelling and topsis optimization of gasoline premixed hcci-di engine with direct injection of fecl3 nano additive blended WCO”, Transactions of FAMENA, Vol. 42 No.3
• G. M. Lionus Leo, S. Sekar, S. Arivazhagan (2018), “Experimental investigation, optimization and ANN model prediction of a gasoline premixed waste cooking oil fueled HCCI–DI engine”, Journal of the Brazilian Society of Mechanical Sciences and Engineering (2018) 40:49 https://doi.org/10.1007/s40430-018-0967-1
• Thamizhvalavan P., S. Arivazhagan, N. Yuvaraj & B. Ramesh (2018), ‘Machinability study of abrasive aqua jet parameters on hybrid metal matrix composite’,Materials and Manufacturing Processes, Accepted for publication. article: https://doi.org/10.1080/10426914.2018.1544707(Impact Factor : 2.274)
• Chandramohan, P, Murugesan, S. N. & Arivazhagan, S (2017), ‘Experimental Investigation and CFD Analysis of Influence of Swirl, Arrangement of Nozzle, Cross Section And Diameter of Jets on Heat Transfer inMulti-Jet Air Impingement Cooling’, Thermal Science ISSN: 0354-9836 Accepted for publication.https://doi.org/10.2298/TSCI170620177C(Impact Factor: 1.45)
• Chandramohan, P,Murugesan, S. N.& Arivazhagan, S (2017), ‘Heat Transfer Analysis of Flat Plate Subjected To Multi-Jet Air Impingement Using Principal Component Analysis and Computational Technique’, Journal of Applied Fluid Mechanics, vol. 10, no.1, pp. 293-306, ISSN : 1735- 3572 (Impact Factor: 1.09)
• S .Gowri P. Thamizhvalavan, M. Kanthababu, S. Arivazhagan (2015), “Experimental Investigations on Material Removal Rate in Abrasive Water jet machining of Al/B4C /ZrSiO4 Hybrid Metal Matrix Composites”, Journal of Applied Sciences Research, Vol.14, No.11, pp.144-150
• Arivazhagan S., Saravanan R. and Renganarayanan S. (2006), ‘Experimental studies on HFC based two-stage half effect vapour absorption cooling system’, Applied Thermal Engineering, Vol. 26, No. 14-15, pp.1455-1462.
• Arivazhagan S., Saravanan R. and Renganarayanan S. (2006), ‘Comparison of exergetic performance of HFC based single and half effect absorption cooling systems’, International Journal of Exergy, Vol. 3, No. 4, pp. 402-418.
• Arivazhagan S., Murugesan S.N., Saravanan R. and Renganarayanan S., (2005), ‘Simulation studies on R134a-DMAC based half effect absorption cold storage systems’, Energy Conversion and Management, Vol. 46, pp. 1703-1713.
• Aswan Abdul Razak, Jacob George, S. Arivazhagan and N. Vinayagam (2012), “Experimental investigation and modeling of a four stroke single cylinder DI diesel engine under various injection timings” International Journal of Engineering Science and Technology Vol. 4 No.08. pp. 3930-3941
• S. Abinav Viswanath, V. Dinesh, S. Arivazhagan and N. Vinayagam, (2012) “Modeling and Analysis of Performance, Combustion and Emmission Characteristics of Jatropha Methyl Ester Blend Diesel for CI Engine with variable Compression Ratio” International Journal of Engineering Science and Technology, Vol. 4 No.07, pp.3457-3471

Papers Published in International Conference : 08

• K Muninathan, S Arivazhagan, R Yuvaraj, K Madhupriya, M Shanmathi (2020), “CFD Analysis on Performance Improvement of Impeller Mixing Solid Waste in Anaerobic Digestion”, IEEE International Conference on System, Computation, Automation and Networking (ICSCAN), pp.1-5.
• S. Sekar, T.N.Valarmathi, S. Arivazhagan, S. N. Murugesan, ’ Optimization of Absorption Heat Transformer for Water Purification using Response Surface Methodology’, International Conference on Polygeneration, Chennai, India 2015
• S. Arivazhagan, S. N. Murugesan, S. Sekar, ’Simulation Studies on Kalina Cycle Systems: Comparison of Performance of Environment Friendly Working Fluids with Conventional Working Fluids’, International Conference on Polygeneration, Chennai, India 2015
• P. Chandramohan, Anish Sekar, S.Arivazhagan, S.N.Murugesan, “Analysis of Heat Transfer and Fluid Flow Characteristics of Swirl and Non-Swirl Impinging Jet for Cooling of Electronic Components” 2013 International Conference on Energy Efficient Technologies for Sustainability
• Rengasamy G., Saravanan R., Arivazhagan S., Sivakumar K. and Narendran C. (2008), “Renewable energy based 40 TR – NH3-H2O GAX operated absorption cooling system” , International Sorption Heat Pump Conference 2008, 23-26 September, 2008, Seoul, KOREA
• Saravanan R., Arivazhagan S. and Renganarayanan S. (2007), “ Experimental studies on both single and half effect R134a-DMAC based vapour absorption cooling systems: A performance comparison”, 2nd International Conference on Solar Air-conditioning, October 18th and 19th, 2007,Tarragona, Costa Dorada, Spain.
• Arivazhagan S., Saravanan R. and Renganarayanan S. (2005), ‘R134a-DMAC Based Half Effect Vapour Absorption Refrigeration System’, International Sorption Heat Pump Conference, June 22-24, 2005, Denver, CO, USA. Arivazhagan S., Saravanan R. and Renganarayanan S. (2003), ‘Simulation Studies on Compression Absorption Cycle using R 134a and DMAC as Working fluids for Heating Applications’, International Conference on Emerging Trends in Refrigeration and Air-conditioning, ACRECONF 2003, New Delhi, pp. 207-214.

Papers Pubished in National Conferences: 02

• Arivazhagan S., Saravanan R. and Renganarayanan S. (2004), ‘Studies on Half Effect Solar Cooling Systems’, National Seminar on Renewable Energy. Calicut, India.
• Arivazhagan S., Murugesan S. N. and Vemuri Laxminarayana (2001), “Shallow Solar Ponds – A Potential and Economic Means of Collecting and Storing Solar Energy”, MINAC 2001, Jawaharlal Nehru Technological University, Ananthapur, India.